Individual Information
Mohammad Hassan Ziraksaz
Mechanic & Aerospace - IA University
Educational Qualification
From 2004 to 2009, PhD. in Aerospace Engineering, Propulsion Div. , Iran
From 1997 to 1999, M.Sc. in Aerospace Engineering, Propulsion Div. , Iran
From 1993 to 1997, B.Sc. in Mechanical Engineering, Thermofluid Div. , Iran
Research Interests
Liquid Fuel Atomization
Combustion Products Estimation in IC Engines
Emission & Pollutant Reduction
Pressurized Fuel Injectors Analysis
Combustion Chamber Cold/Hot Test
Underwater Bullets and Projectiles
Underwater Solid Propulsion
Under and Over Expansion Phenomena in Exhaust Plume
Solid Propellant Rockets
Solid Propellant Application for Underwater Missiles
Unmanned Arial Vehicles (UAV and MAV)
Unmanned Underwater Vehicles (UUV and MUUV)
Super and Hyper Cavitations
New Energy Sources in Power Plants
Hybrid Power Plants
External Combustion Power Plants
Selected Publications
From 2004 to 2009, PhD. in Aerospace Engineering, Propulsion Div. , Iran
From 1997 to 1999, M.Sc. in Aerospace Engineering, Propulsion Div. , Iran
From 1993 to 1997, B.Sc. in Mechanical Engineering, Thermofluid Div. , Iran
Research Interests
Liquid Fuel Atomization
Combustion Products Estimation in IC Engines
Emission & Pollutant Reduction
Pressurized Fuel Injectors Analysis
Combustion Chamber Cold/Hot Test
Underwater Bullets and Projectiles
Underwater Solid Propulsion
Under and Over Expansion Phenomena in Exhaust Plume
Solid Propellant Rockets
Solid Propellant Application for Underwater Missiles
Unmanned Arial Vehicles (UAV and MAV)
Unmanned Underwater Vehicles (UUV and MUUV)
Super and Hyper Cavitations
New Energy Sources in Power Plants
Hybrid Power Plants
External Combustion Power Plants
Selected Publications
Journal Articles
Conference Papers
| 1. |
“Experimental Investigation of Swirl Atomizer Spray Defections”, International Journal of Nonlinear Dynamics in Engineering and Sciences (IJNDES). |
| 2. |
“Experimental Evaluation of a Reverse Engineering Swirl Atomizer“, International Journal of Nonlinear Dynamics in Engineering and Sciences (IJNDES). |
| 3. |
“Artificial Neural Network Evaluation of a Reverse Engineering Swirl Atomizer”, International Journal of Nonlinear Dynamics in Engineering and Sciences (IJNDES). |
| 1. |
“Experimental Evaluation of a Reverse Engineering Swirl Atomizer”, Mohammad Hassan Zirakssaz, Fatholah Ommi, Davod Ganji, Mahdi Ashjaee, 48th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2012, 10.2514/6.2012-3747. |
| 2. |
“Current Gasoline Consumption and Relevant Emission”, R'09 Twin World Congress, Switzerland, Davos, September 14-16, 2009. |
| 3. |
“Emission of Diesel Engines in Urban Transportation”, R'09 Twin World Congress, Switzerland, Davos, September 14-16, 2009. |
| 4. |
“Application of Geothermal Energy in Residential Towers-Part Two”, 22nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Parana, Brazil, from August 31st to September 3rd, 2009. |
| 5. |
“Application of Solar Energy and Boiler Waste Heat in Power Plants-Part One”, 22nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Parana, Brazil, from August 31st to September 3rd, 2009. |
| 6. |
“Application of Solar Energy and Boiler Waste Heat in Power Plants-Part Two”, 7th International Energy Conversion Engineering Conference, 2009, 10.2514/6.2009-4560. |
| 7. |
“An Experimental Study on Fuel Atomization in Pressurized Injectors”, 45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2009, 10.2514/6.2009-5405. |
| 8. |
“Application of Geothermal Energy in Residential Towers”, 7th International Energy Conversion Engineering Conference, 2009, 10.2514/6.2009-4625. |
| 9. |
“How to Design, Build and Test Small Solid Propellant Rocket Motor (Part One)”, 45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2009, 10.2514/6.2009-4892. |
| 10. |
“A Novel Turbo-Solid Engine”, 45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2009, 10.2514/6.2009-5050. |
| 11. |
“Combining the Cruise and Pegasus Missiles for Spy Micro-Satellite Launching (Part Two: Primary Scketch)”, 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2008, 10.2514/6.2008-5058. |
| 12. |
“Solid Propellant Application in High Speed Underwater Projectiles and Bullets”, 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2008, 10.2514/6.2008-4975. |
| 13. |
“Prediction of Combustion Products in Hydrocarbon - Air Mixture”, 39th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 2003, 10.2514/6.2003-4639. |
| 14. |
“Combining the Cruise and Pegasus Missiles for Spy Micro-Satellite Launching- Part one: Mission Objective”, 39th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 2003, 10.2514/6.2003-5117. |
| 15. |
“Cold Test Procedure for Approaching the Prototype Can-Combustors”, 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2002, 10.2514/6.2002-3701. |
| 16. |
“Approaching the Prototype CAN-Combustors by Combustion Test”, 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2002, 10.2514/6.2002-3869. |
| 17. |
“Mini-Turbojet Engine Test Stand for Starting Test”, 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2002, 10.2514/6.2002-4052. |
| 18. |
“Nozzle analyses of underwater missiles”, 37th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Archive Set 799, 1963, 10.2514/6.2001-3442. |
| 19. |
“Test and experimental optimization for pressurized injector”, 37th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Archive Set 797, 1963, 10.2514/6.2001-3277. |
| 20. |
“Combustion Initial Conditions Effects on Combustion Products Mass Fraction“, (5th Inter. & 9th Annual Mechanical Eng. Conference, ISME2001 Iran). |
| 21. |
“Combustion Product Model for Performance Estimation in IC Engine“(1st Inter. & 3rd Aerospace Engineering Conference, Aero2000 Iran). |
| 22. |
“Combustion Products in Gas Turbine“, Iran University of Science and Technology, 1999. |