AASCIT - Journal -Reviewers

Individual Information

Manoj Namdeo Bagde

CSIR-Central Institute of Mining and Fuel Research, Regional Center, Nagpur, INDIA

Web Page: www.cimfr.nic.in
Research Interests
Rock Mechanics (Fatigue properties, rockburst, strata control, fractal in rock)
Mining Engineering ( Backfill design and failure, thick and wide orebody mining designing, instrumentation )
Rock mass characterization (Fractal approach, insitu rock characterization, Schmidt hammer application)
Rock Support Design in mines, tunnels and caverns
Work Experience
From 03/1996 to till date, Scientist , CSIR-Central Institute of Mining & Fuel Research, India
From 02/2002 to 06/2004, Ph. D. Fellow , VSB-TU, Ostrava, Czech Republic
From 07/2010 to 06/2011, BOYSCAST Fellow , McGill University, Montreal, Canada
Projects
From 03/2010 to 03/2014, Feasibility and application of bio-fuel as well as low cost and diluted ANFO for cost effective and safe blasting practices in opencast metalliferrous mines In India
Ministry of Mines, Govt of India funded
From 07/2010 to 06/2011, Analysis of backfill failure into adjacent stopes
BOYSCAST Fellowship-DST, Govt of India / McGill University Canada
From 04/2004 to 09/2007, Estimation of Rock Mass Strength and Modulus based on Fractal Approach
Ministry of Water Resources, Govt of India funded
From 06/2002 to 01/2004, Investigation into stress-deformation behaviour of rock under dynamic loading
Czech Republic Academy funded/VSB-TU Ostrava
From 06/2002 to 06/2004, Behaviour of Carboniferous Rocks in Uniaxial Compression under Dynamic Cyclic Loading
Czech Republic Academy funded/VSB-TU Ostrava /Ph.D. Thesis
From 2001 to 2002, Rock mass characterization by fractal analysis
CSIR-CIMFR Inhouse R &D funded
From 1997 to 2002, Development of innovative models for optimization of blast fragmentation and muck profile applying image analysis technique and subsystems utilization concept in Indian surface coal mining regime
Ministry of Coal, Govt of India funded
From 02/2012 to 06/2014, Designing stoping operations in the case of thick and wide orebody at Kandri mine of M/S MOIL Ltd.
MOIL Ltd, Govt of India Funded
From 02/2013 to 02/2015, Instrumentation and data analysis of the strain bars installed at 10th and 11th Level at Bhalaghat mine of M/s MOIL Ltd
MOIL Ltd, Govt of India Funded
From 08/2008 to 06/2010, Advice on removal of boulders and slope surface stabilization at Ajanta Caves
ASI, Govt of India funded
Selected Publications

Books

1.	Proc. of the National Technical Meet on “Advances in Mining Technology, Bagde M. N. & Tiwari M. S. (Editors),October 1-2, 2011, VNIT Nagpur, Organized jointly by VNIT Mining Alumni Association and VNIT, Nagpur

Journal Articles

1.	Bagde M. N. & Petros V. (2011). The effect of microstructure on fatigue behavior of intact sandstone. Int. J. of Geosciences,Vol.2, No. 3, August, online, 240-247 Doi: 10.4236/ijg2011.23026
2.	Bagde M. N., Petros V. (2009). Fatigue and dynamic energy behavior of the rock subjected to cyclical loading. Int. J. Rock Mechanics & Mining Sciences, 46, 200-209
3.	Bagde M. N., Petros V. (2005). Fatigue properties of intact sandstone samples subjected to dynamic uniaxial cyclical loading. Int. J. Rock Mechanics & Mining Sciences, 42, 237-250
4.	Bagde M. N., Petros V. (2005). The effect of machine behaviour and mechanical properties of intact sandstone under static and dynamic uniaxial cyclic loading. Rock Mechanics & Rock Engineering, 38 (1), 59-67.
5.	Bagde M. N., Petros V. (2005). Waveform effect on fatigue properties of intact sandstone in uniaxial cyclic loading. Rock Mechanics & Rock Engineering, 38 (3), 169-196.
6.	Bagde M. N., Raina A. K., Chakraborty A. K., Jethwa J. L. (2002). Rock mass characterisation by fractal dimensions. Engineering Geology, 63(1-2), 141-155.
7.	Bagde M. N. (2000). An investigation into strength and porous properties of metamorphic rocks in the Himalayas: A case study. Geotechnical and Geological Engineering, 18, 209-219.
8.	Bagde M. N. & Petros V. (2012). Dynamic properties of sandstone rock subjected to cyclic loading. ISRM (I) Journal,Vol.1, No.1, January, online, 5-16. ISSN:2277-131X(Print), ISSN:2277-1328(Online).
9.	Bagde M. N., Singh A.K., Kumar N., Prasad C.D & Jha B.K. (2010). An experience of designing supports in newly opened Belgaon underground coal mine. J. of Mines, Metals and Fuels, 58(5):103-106.
10.	Bagde M. N. (2009). In-situ stress and elastic wave velocity relationship: a review. J. of Mines, Metals and Fuels, 57 (7), July 2009, 174-177.
11.	Bagde M. N., Mondal P. K., Singh S. K., Singh T. N. (2001). Depillaring of developed pillars with cable bolt support at Nandan mine No. 1. Mining Engineers' Journal, 10(2), May, 11-18.
12.	Bagde M. N. (2000). Development in cable bolts and installation technique. Magazine of Coal Mining Technology and Management (CMT&M), Indian Institute of Coal Management (IICM), Kanke Ranchi, Part I, II, 5(7-8), July-August, 11-17 & 3-6.
13.	Bagde M. N. (2000). Mining Engineering Curricula for 21st Century. The Indian Mining & Engineering Journal. 38(9), September, 32-36.

Conference Papers

1.	Bagde M. N. (2014). Numerical study to design stoping operations with sand filling in the case of thick and wide orebody with complex geology. In ARMS8-2014 ISRM Int Symp -8th Asian Rock Mechanics Symposium-Rock Mechanics for global issues-National Disasters, Environment and Energy , Organized by The Japanese Committee for Rock Mechanics (JCRM) - Japan National Group for ISRM, Sapporo, Japan during 14-16 Oct, 2014, Norikazu Shimizu, Katsuniko Kaneko & Jun-ichi Kodama (Eds), Abstract in Proceedings, p124. (Full paper in e-proceedings, 1461-1468).
2.	Bagde M. N. and Karekal S. (2014). Fatigue properties of sandstone in pre- and –post failure and its implication to vibratory rock cutting. In Int. Symp ROCK INDIA 2014-Present Technology and Future Challenges and Workshop on Open Pit Mining, 20-22, August, CBIP- N. Delhi, 178-186.
3.	Bagde M. N. (2014). The Numerical analysis study of backfill and rib pillar interaction in cut-and-fill stoping environment. In KAYAMEK/ROCKMEC 2014-XI Regional Rock Mechanics Symposium , Organized by Afyon Kocatepe University and Turkish National Soc for Rock Mech, Afyonkarahisar Korel Thermal Resort Hotel, 07-09 May, 2014.
4.	Bagde M. N. (2014). Numerical analysis study of backfill stability. In Int. Conf on Innovative Surface and Underground Mining Technology for Performance Enhancement, Organized by Jr Mines, Metals and Fuels, Kolkatta, 16-18 Jan, 2014.
5.	Bagde M. N., Soni A. K. and Sinha A. (2013). Engineering characterization of rock mass to suggest boulders and slope surface stabilization at Ajanta Caves, Aurangabad, India. In SINOROCK 2013-3rd ISRM Symp on Rock Mechanics “ Rock Characterization, Modelling and Engineering Design Methods”, Organized by ISRM and Chinese Academy of Sciences, Sanghai, China,18-20 June 2013. Feng, Hudson and Tang (Eds)., Taylor & Francis Group, London, 169-172.
6.	Bagde M. N. and Mitri H. S. (2012). Numerical analysis of backfill failure due to adjacent stope mining. In ICGI2012- Proc. Int. Conf. on Ground Improvement & Ground Control –Transport Infrastructure Development and Natural Hazards Mitigation, Un. Wollongong, Australia, 30 Oct-2 Nov 2012, Buddhima Indraratna, Cholachat Rujikiatkamjorn and Jayan Vinod (Eds), Research publ., Vol II-1443-1448.
7.	Bagde M. N., Raina A. K., Choudhury P. B., Sinha A. (2011). Fractal approach to determine rock mass strength and deformation. In 12th ISRM Congress-Harmonizing Rock Eng. & The Envt. Bejing, China, October 2011, Extended Abstract:162 (Full paper on CD), Guo & Zhou (Eds), Taylor & Francis publ.
8.	Bagde M. N., Emad M. Z., Mitri H., Thibodeau D., Isagon I., Gustas B. (2011).Examining the influence of stope dimensions and mining sequence on backfill dilution: a review with case study. In Int. Conf. on Technological Challenges and Management issues for sustainability of Mining Industries (TMSMI), August 04-06, 2011, organized by Dept. of Mining Eng., NIT Rourkela, India, B. K. Pal and S. Chatterjee (Eds), 13-28.
9.	Bagde M. N. (2010). Fracture and fragmentation of rock subjected to uniaxial cyclical loading. In Proc. GeoFlorida 2010: Advances in Analysis, Modeling, & Design (GSP 199), Reston VA (Ed), USA:ASCE,2010:214-223. Conf. Proc. doi:10.1061/41095(365)18. http://site.elibrary.com/lib/nwvu/Doc?id=10475974&ppg=260
10.	Bagde M. N., Petros V. (2009). Waveform effect on pre- and post-failure fatigue properties of sandstone. In 7th Int. Symp. on Rockburst and Seismicity in Mines (RaSiM7) : Controlling Seismic Hazard and Sustainable Development of Deep Mines, Dalian, China, 21-23 August 2009, Tang CA (Ed), Rinton Press, 407-414.
11.	Bagde M. N., Chakraborty A. K. (2009). Schmidt hammer as a rock mass characterization tool. In SINOROCK 2009- ISRM Int. Symp. on Rock Mechanics, Rock Characterization, Modelling and Engg. Design Methods, 19-22 May 2009, The University of Hong Kong.
12.	Petros V., Bagde M. N., Holub K. & Michalcik P.(2003). Comparison of changes in the strength and the deformation behaviour of rocks under static and dynamic loading. In Proc. of 10th Congress of the ISRM-Technology Roadmap for Rock Mechanics, Sept. 8-12, Johannesburg, South Africa, Handley M .& Stacey D. (Editors), Vol. II, 899-902.
13.	Bagde M. N., Petros V. (2003). Computation of stress and modulus from peak valley data in uniaxial compression test in dynamic cyclic loading conditions. In Proc. of XXVIII ASR 2003- Seminar on Instruments and Control, VSB-TU Ostrava, Faculty of Mechanical Engineering, May 6, Ostrava, Czech Republic, P. Koci, R. Farana & L. Smutny (Editors), 19-23.
14.	Bagde M. N., Petros V. (2003). The mechanical properties for sandstone rock samples in dynamic uniaxial cyclic loading . In Proc. of Mineral Raw Materials & Mining Activity of the 21st Century, VSB-TU Ostrava, Faculty of Mining & Geology, Nov. 25-27, Ostrava, Czech Republic, P. Fecko & C. Petros (Editors), Vol. II, 641-646.
15.	Chakraborty A. K., Raina A. K., Bagde M. N., Ramulu M., Choudhury P. B., Haldar A., Sahoo P., Bandopadhyay C. (2003). Rock blasting software-CMRI contributions. In Proc. of Mineral Raw Materials & Mining Activity of the 21st Century, VSB-TU Ostrava, Faculty of Mining & Geology, Nov. 25-27, Ostrava, Czech Republic , P. Fecko & C. Petros (Editors), Vol. II, 777-789.
16.	Bagde M. N., Raina A. K., Chakraborty A. K., Jethwa J. L. (2002). Fractals in rock mass characterisation: A study. In Engineering Geology for Developing Countries - Proceedings of the 9th Congress of the International Association for Engineering Geology and the Environment. Durban, South Africa, 16-20 September, J. L. van Rooy and C. A. Jermy (Editors), 399-403.
17.	Bagde M. N., Choudhury P. B., Chakraborty A. K., Raina A. K. (2002). Controlled blasting during benching of machine and transformer hall of Ghatgar Hydroelectric project-a case study. In ISRM Regional Symp.- Advancing Rock Mechanics Frontiers to meet the Challenges of 21st Century, 24-27 September, New Delhi, India, VI:15-19.
18.	Bagde M. N. (2000). Finite Element Analysis of Underground Caverns of Nathpa Jhakri Hydel Project. In Int. Conf. On Tunneling Asia' 2000, Kaushish and Ramamurthy (Editors), 26-29 September, New Delhi, 47-57.
19.	Bagde M. N. (1999). An investigation into porous properties of metamorphic schistose rocks by Mercury Porosimeter test. In Rocksite - Int. Conf. on Rock Engineering Techniques for Site Characterization, Jha and Gupta (Editors), Dec 6-8, Banglore, India, 319-323.
20.	Bagde M. N., Saharan M. R., Jethwa J. L. (1999). Roadway stability in weak swelling rock- an approach for clean coal initiatives. In Int. Symp. on Clean Coal Initiatives, Singh and Gupta (Editors), January, New Delhi, 141-152.