Indexing
All Issues
Submission
Author Guidelines
Reviewers
Editorial Members
Publication Fee
Vol.3 , No. 1, Publication Date: May 6, 2016, Page: 1-6
, Scanning electron microscopy (SEM), X-ray diffractometry (XRD). Flux was not deposited on low carbon steel sheet alloy, and the electron beam was irradiated on material. Shock hardening on material by high energy electron beam did not improve wear resistance, tensile strength and the surface hardness. These findings suggested that surface shock hardening using high energy electron beam irradiation was not economical and useful for the development of surface shock hardening with improved resistance.&picture=http://www.aascit.org/aascit/decorators/img/journal/916.jpg)
| [1] | M. Farnush, School of Metallurgy & Materials Eng., College of Eng., University of Tehran, Tehran, Iran. |
This study is concerned with the microstructural analysis and reviewing of wear resistance, of tensile strength and of the surface hardness of low carbon steel sheet alloy by a high energy electron beam. The modified surface microstructure was characterized with methods of optical microscopy (OM), Scanning electron microscopy (SEM), X-ray diffractometry (XRD). Flux was not deposited on low carbon steel sheet alloy, and the electron beam was irradiated on material. Shock hardening on material by high energy electron beam did not improve wear resistance, tensile strength and the surface hardness. These findings suggested that surface shock hardening using high energy electron beam irradiation was not economical and useful for the development of surface shock hardening with improved resistance.
Keywords
High Energy Electron Beam, Radiation, Low Carbon Steel Sheet
Reference
| [01] | F. C. Campbell, Elements of Metallurgy and Engineering Alloys, ASM International – The Materials Information Society. |
| [02] | L. Baker, S. Daniel, J. Parker, Metallurgy and processing of ultra-low carbon bake hardening steels, Mater. Sci. Technol. 18 (2002) 355–368. |
| [03] | S. R. Elmi Hosseini, Simulation of case depth of cementation steels according to Fick's laws, J. Iron Steel Res. Int. 19 (11) (2012) 71–78. |
| [04] | M. Farnush, 4th International Conference on Industrial Tools, Bled, 295-299; 2003, Slovenia. |
| [05] | R. Dave, D. L. Goodman, M. Farnush, T. W. Eagar, and K. C. Russell: Int. Conf. on “Beam processing of advanced materials”, Pennsylvania, 537-551; 1993, The Minerals, Metals and Materials Society (TMS), Warrendate, PA, USA. |
| [06] | B. S. Yilbas, S. Z. Shuja, A. Arif, M. A. Gondal: J Matter. Processing Technology, 2003, 135,1, 1, 6-17. |
| [07] | D. J. O’Keeffe, D. J. Pastine, “A Practical Guide to Grȕneisen Equations of State,” Metallurgical Effects at High Strain Rates, (New York: Plenum Press, 1973) p. 157. |
| [08] | N. C. Christofilos et al, “High Current Linear Induction Accelerator for Electrons,” the review of Scientific Instrument, 35(7) (1964), 886-890. |
| [09] | D. L. Brix, “Use of Induction Linacs with Nonlinear Magnetic Drives as High Average Power Accelerators,” UCRL – 90878. |
| [10] | H. P. Kirchner, “strengthening of Ceramics,” (New York: Marcel Dekker, 1979). |
